Current Design Examples
BLANCHE42®
WWTP 170.000 P.E.
Erweiterung Wintergarten, 2018
Stahlbau, 2017
Architekturleistung HOAI, Lp. 1-9, 2016
MBR 3.500 P.E., 2015
Leachate Treatment Vietnam, 2014
Conservatory, 2012
WWTP Cost Estimation
Project References
Please find selected references for completed projects that are demonstrating our service capabilities and quality of work for your first information.
The complete reference list is available upon request.
Please do not hesitate contating us by email for further details.
2023 Feasibility Study for 1,5 Mio. Population Equivalent (1000 MGL) - Central Asia
Conceptual Design of the WWTP and Sludge Treatment Facílities with Sludge Drying.
Process Design with MEICA Design, CAPEX/OPEX for optimized OPEX under max. heat/power recovery.
• WWTP design for Tertiary Wastewater Treatment (BNR)
• Advanced Wastewater Treatment for enhanched pathogene removal
• Advanced Sludge Digestion with WAS disintegration
• Power recovery by CCHP for Trigeneration
• Thermal Sludge Treatment for Hygenisation with Mono-landfill
Feasibility Study for Cahul WWTP, Moldavia
October 2019 - April 2020
KfW: Water Supply and Sanitation in Cahul BMZ N° 201568344 and 201668904
Employer: FWT (www.fwt.fichtner.de)
Expert: Mathias Blanche (Wastewater & Sludge Process Expert)
Objective: Conceptual Design of the WWTP (32.000 P.E.), with MEICA Design, CAPEX/OPEX for minimized OPEX., incl. PID's and drawings, 3D presentations and workshops. Tender Design for FIDIC Yellow Book.
• WWTP design for Tertiary Wastewater Treatment (BNR) under Stage2
• Advanced sludge digestion
• Power recovery by CCHP for trigeneration
• Solar sludge drying with Mono-landfill
Feasibility Study for Cvetojevac WWTP in Kragujevac, Serbia
August 2018 - December 2019
SIDA: Environmental Infrastructure Support Programme - Phase 2 (EISP2)
Employer: Brooks Hannas & Partners Consortium, Belgrade
Expert: Mathias Blanche
Objective: Process/Hydraulic/MEICA design on conceptual design level for 2 variants (rehabilitation and new-built), incl. CAPEX/OPEX calculations, PID's and drawings, 3D presentations and workshops.
• WWTP design for Tertiary Wastewater Treatment (BNR)
• Advanced sludge digestion with WAS-disintegration
• Power recovery by CCHP for trigeneration
• Solar sludge drying with Mono-landfill PPT can be obtained after formal request!
National Sludge Management Strategy for Serbia
Nov. 2017 - March 2019
EuropeAid/132633/C/SER/Multi
Employer: ETI/expertise & advisors, Paris
Expert: Mathias Blanche
Objective: Sludge treatment, reuse and disposal process overview, definition of applicable sludge treatment concepts under consideration of current energy efficiency requirements and tendencies for reduction of specific sludge production. Reuse and disposal options considering latest developments for Phosphorous reclamation.
Draft action plan for implementation of sludge management concepts on regional level, cost estimation and proposal for implementation on short-/mid-/long-term horizon.
Final workshops and training seccions were held in Febr. 2019.
Training documents can be obtained after formal request!
Tertiary Wastewater Treatment, Argentina
Sept. 2018 - March 2019
Situation: UV-Disinfection required for discharge of treated WWTP-effluent into lake. Bathing water requirements to be fullfilled due to tourism and fishing.
Solution: Mico-Filtration plus UV-Disinfection, acc. EU/USEPA-Standards. Specific CAPEX 10 €/P.E. at OPEX 0,75 €/m3/yr.
Objective: Process design with design drawings and documentation for FIDIC YB Tender.
Process Expert: Mathias Blanche
Girne/Kyrenia WWTP - North Cyprus
August 2017
Extension of SBR Type WWTP for up to 80.000 P.E. (16 MLD)
Employer: Belediyesi Girne
Expert: Thomas Blanche
Objective: Headworks - Final design with Specifications and BoQ
Extra: Functional hydraulic model of PISTA grit chamber arrangement.
Completion of BLANCHE OFFICE Building - Steelworks for Stairs
August 2017
Velipoje WWTP - Phase III, Albania
March 2015 - May 2017
Project: EUROPEAID/133963/C/SER/AL
Employer: Eptisa SEE
Objective: Review and revision of Employers process design and documentation (detailed design drawings and BoQ) for Phase III - Extension of WWTP
Process Expert: Mathias Blanche
Song Trang (Waste Disposal) Leachate Treatment Plant
December 2015
Project: BMZ Project ID
Employer: Fichtner FWT, Freiburg
Objective: Review and revision of Employers process design and documentation (detailed design drawings and BoQ) for Constructed Wetland, 520 m3/d.
Process Expert: Mathias Blanche
Designer: Thomas Blanche
Kotor Bay, MNE
August - Dec. 2015
WATER SUPPLY AND SANITATION ADRIATIC COAST V – COMPONENT 2
Project: BMZ Project ID 2015 67 817
Employer: Fichtner FWT, Freiburg
Objective: Process design and documentation for 3 WWTP's in Kotor Bay
with Variant Analysis for SBR/MBR and MBBR/IFAS process.
Process, M&E Expert: Mathias Blanche
Architectural & Civil Design: Thomas Blanche
Girne/Kyrenia WWTP - North Cyprus
Oct/Nov. 2015
Extension of SBR Type WWTP for up to 80.000 P.E. (16 MLD)
Employer: Belediyesi Girne
Expert: Mathias Blanche
Objective: Implementation concept for extension and upgrade of the existing WWTP for maximum treatment capacity on site.
March 2015 - Industrial Pre-Treatment - Turkey
Works Supervision CWMC MARISCINA - Solid Waste Disposal - Croatia
March 2014 - Oct. 2015
Construction works stated in June 2012
EuropeAid-IPA
MBR Type Leachate WWTP
Client: ECOPLUS, Riejka
Employer: EPTISA Adria d.o.o., Zagreb
Expert: Mathias Blanche
Objective: Works Supervision of WWTP, FIDIC Yellow Book
WWTP SLAVONSKI BROD, Croatia
October 2011 - October 2015
Construction works stated in June 2012
EuropeAid-IPA 2008HR16IPR003/1
SBR Type WWTP for 60.000/80.000 P.E. with Sludge Digestion
Client: HR_Voda, Zagreb
Employer: EPTISA SEE, Belgrade
Expert: Mathias Blanche
Objective: Works Supervision, FIDIC Yellow Book
Velipoje WWTP, Albania - Phase I&II
March 2015
Construction Works in 2012
EuropeAid/128827/C/SER/AL
SBR Type WWTP for 18.000 P.E.
Employer: EPTISA Adria d.o.o., Zagreb
Expert: Mathias Blanche
Objective: Works Supervision, FIDIC Red Book
Feacal Sludge Treatment - Vanuatu
October 2014
Project: Port Vila Urban Development Project
Employer: RPSA Limited (Roughton International)
Process: Mathias Blanche
Designer: Thomas Blanche
Position: Drainage/Sanitation Support Engineer in Vanuatu
Objective: Tender Design.
GIS for Indochina
Nizip WWTP
Febr. 2014 - Dec. 2015
Flow Chart
Phase 1 with 114.000 P.E. with
Tertiary Treatment with Sludge Digestion
EuropeAid:
Client:
Employer: Fichtner-FWT, Freiburg
Objective: Process design, FIDIC Yellow Book Tender
MAPUTO WATER SUPPLY - PROJECT
October 2013 - January 2014
Feasibility Study
Employer: EGIS International, Nairobi
Expert: Thomas Blanche
Objective: GIS Study and Map-Sets, Hydrological and Topographical Analysis.
WWTP SISAK, Croatia
EuropeAid/132999/D/SER/HR
Conventional Type WWTP for 60.000 P.E. with
Simultaneous Aerobic Sludge Stabilization
Client: HR_Voda, Zagreb
Employer: EPTISA Adria d.o.o, Zagreb
Objective: Works Supervision, FIDIC Yellow Book
SEEM for Process Design Optimization, India
November - December 2012
Flow Chart - SEEM
SBR Type WWTP design capacity
15 MLD (110.000 P.E.) and
20 MLD (140.000 P.E.)
Employer: Fichtner FWT, Freiburg
Expert: Mathias Blanche
Objective: Process Design Assessment,
Energy Efficieny Analysis with SEEM,
Redesign for Power Generation.
WWTP PLAV, Montenegro
April 2012 - February 2013
Visualization Draft Layout of WWTP
Capacity: 18.000 P.E.
Client: ECD Montenegro
Employer: Alternative Consulting, Belgrade
Expert: Mathias Blanche
Objective: Preliminary design for the construction of waste water treatment plant and sewerage network in the Municipality of Plav and the urban settlement of Gusinje, Request N° 2011/279306-1
SBR Type WWTP with Main Pumping Station
WWTP BIHAC, Bosnia-Hercegovina
October 2011 - March 2012
Capacity: 60.000 P.E.
Client/IFI: KfW Frankfurt
Employer: Fichtner FWT, Freiburg
Objective: Conceptual design, incl. designers cost estimate and least-cost-analysis.
Expert: Mathias Blanche
WWTP Sipopo, Equatorial-Guinea
July 2010 - October 2012
WWTP SIPOPO: 12.000 P.E. MBR
CNP-Removal acc. 91/271/EEC & 2006/7/EC.
MBR system with simultaneous sludge stabilisation
and sludge dewatering.
Estimated budget 5 Mio. EUR.
Final design, incl. hydraulic & process design; architectural, civil and mechanical design; co-ordination of electrical and SCADA design.
Drawings, Spec's and BoQ's for civil and M&E works for tendering acc. German Standards (analogous Red Book).
Expert: Mathias Blanche
Cooperation: BitControl (Electrical and SCADA Design)
Kosovo South-West
April 2011 - August 2011
WWTP PRIZREN: 100.000 P.E.
WWTP PEJA: 80.000 P.E.
WWTP GJAKOVA: 50.000 P.E.
Client/IFI: KfW Frankfurt
Employer: Fichtner FWT, Freiburg
Objective: Conceptual design, incl. designers cost estimate and least-cost-analysis.
Expert: Mathias Blanche
WWTP Constanta, Romania
August 2007 - December 2011
Capacity: 355.000 P.E.
Client: CFCU, Bucharest & RAJA, Constanta
Employer: IGIP mbH, Darmstadt
Objective: Works Supervision, FIDIC Yellow Book
Expert: Mathias Blanche
Fotos ©PASSAVANT ROEDIGER ANLAGENBAU GmbH, Hanau, Germany
WWTP Ramnicu Valcea, Romania
Jule 2008 - July 2011
Capacity: 130.000 P.E.
Client: CFCU, Bucharest
Employer: EPTISA Proyectos Internacionales S.A.
Objective: Works Supervision, FIDIC Yellow Book
Expert: Mathias Blanche
WWTP Gussev/Gumbinnen, Russia
Mai 2005 - October 2005
Capacity: 25.000 P.E.
Client: Oblast Kaliningrad, EU-Delegation
Employer: MVV Consulting GmbH, Mannheim
Objective: Conceptual Design for 4 WWTP's, incl. Cost Estimates.
FIDIC Yellow Book Tender Final Design (Vol. 3-5).
Expert: Mathias Blanche
WWTP Kyrenia/Girne, North-Cyprus
July 2004 - November 2010
Opening Ceremony 2010
Capacity: 15.000 P.E.
General Consulting Services during said period to City of Girne and UNDP.
Objective: Consultancy Services and Process Assessment; Feasibility Study for rehabilitation or extension of the WWTP up to 15,000 P.E. Tender design. Tendering (RFP) & Tender Evaluation, acc. UNCRITAL.
Client: Municipality of Girne/Kirenia, North-Cyprus
Employer: UNDP Nicosia 2004 and Municipality of Girne 2006 - 2010
Expert: Mathias Blanche
Senior Supervisor for WWTP Kyrenia Rehabilitation & Extension.
Mila Mia Haspolat Tender Evaluation
Capacity: 270.000 P.E.
Client: Sewerage Board of Nicosia, Cyprus
Employer: UNDP PFF Nicosia
Expert: Mathias Blanche
Objective: Tender Evaluation for MBR type WWTP
General Consulting Services to UNDP for Mila Mia Haspolat WWTP.
WWTP Sivas, Turkey
November 2005 - June 2006
Capacity: 140.000 P.E.
Client: KfW, Frankfurt and Citiy of Sivas
Employer: H.P. Gauff Ingenieure GmbH & Co. KG -JBG-, Frankfurt
Objective: Review of conceptual design and elaboration of Volumes 3-5 for FIDIC Yellow Book (Plant and Design, Build). Backstopping and assistance during Tender Period & Evaluation.
Expert: Mathias Blanche
WWTP Corlu, Turkey
October 2003 – December 2004
Capacity: 40.000 m3/d (appr. 1 Mio. P.E.)
Client: Corlu Organized Industrial Zone
Employer: MVV Consulting GmbH, Mannheim
Objective: Coordination of the team of experts for process and civil design approval, incl. design & safety evaluation (HAZOP). Assistance to the client in all technical aspects (i.e. hydraulic calculations, dimensioning of equipment).
Expert: Mathias Blanche
WWTP ABUJA, Nigeria
Period 1999 - 2001
Capacity: 700.000 P.E.
Assignment: Sub-consultant
Scope: Final Design (Process/Hydraulic/Meica Design, Detailed Design Drawings, BoQ (acc. German Standards), coordination specialized experts.
Expert1: Mathias Blanche (Process, MEICA)
Expert2: Thomas Blanche (Architectural & Detailed Design)
WWTP Tolmin, Slovenia
Period: 2000
Capacity: 8.000 P.E.
Assignment: Sub-consultant for OMS Kläranlagen GmbH
Scope: Preliminary Design (Process/Hydraulic/Meica Design, Drawings, BoQ
Expert1: Mathias Blanche (Process, MEICA)
Expert2: Thomas Blanche (Architectural & Detailed Design)
WWTP Al Bireh (Rahmalla), Palestine
1997 - 2000
Capacity: 50.000 P.E.
Client: KfW Frankfurt
Employer: PASSAVANT-WERKE AG
Expert1: Mathias Blanche (Process, MEICA)
Expert2: Thomas Blanche (Architectural & Detailed Design, PM)
1. Tender Proposal (FIDIC P&DB); incl. Architectural Design, Process Design, M&E and Hydraulic Engineering, Cost Estimates and Tendering Assistance.
2. Final & Detailed Design, incl. Architectural, Hydraulic & Process Design, Mechanical Engineering and co-ordination of special designers for Electrical & SCADA as well as Structural Engineering, support of local designers.
3. Project & Site Management; Documentation (O&M, As-built).
WWTP Hahnstätten, Germany
Period
Druckversion 